BEFORE USING BLACK MAG’3
- Be certain your firearm is in good shootable condition.
- Have it examined and approved by a competent gunsmith.
- Read and understand this Black Mag’3® brochure and know safe operation
. of your firearm.
- Know characteristics of Black Mag’3® as described in this brochure.
- Know the difference between Black Mag’3® and modern smokeless powder as used in
. conventional firearms and do not confuse Black Mag’3® with modern smokeless power.
- Color is not an indication of the type of powder.
- Learn the safe and maximum loads recommended by your rifle and bullet manufacturers.
CAUTION: NEVER SMOKE OR USE ANY POTENTIAL SOURCE OF IGNITION WHILE LOADING, SHOOTING OR HANDLING BLACK MAG’3.
USING BLACK MAG’3 SAFELY
- Know and use safe operating methods when handling and loading Black Mag’3®.
- Always keep the firearm pointed in a safe direction.
- Always keep fingers off the trigger until ready to shoot.
- Always keep the gun unloaded until ready to use.
- Keep muzzle away from the body at all times.
- Always wear adequate eye and ear protection.
- Do not increase loads past the recommendation of the gun and/or bullet manufacturer.
- Do not dispense directly from container into firearm. Use a black powder measure.
- Always keep containers closed unless filling your black powder measure.
- Be certain no ember is smoldering in the barrel before pouring powder.
- Seat projectile against powder charge. Airspace between powder and projectile may
. create a hazardous situation.
- Do not pound on or bounce the ramrod on the ball. All propellants are impact sensitive
. and may ignite on impact.
- Do not cup hand over end of ramrod while loading.
- Close container before discharging the firearm.
- Never leave firearm loaded.
- Always clean firearm. Be certain the firearm is unloaded prior to cleaning.
- Clean up any spilled powder.
- Do not use a vacuum cleaner.
Note: The manufacturing of Black Mag’3® involves a "curing" process
that results in the release of a small quantity of harmless gas, which may continue
after the product is bottled. This may cause the bottle to swell,
but it does not affect the safety, performance or stability of Black Mag’3®.
If you notice that the bottle is bulging, simply loosen the lid to allow
the harmless gas to escape; then re-seal the lid.
If you are not willing to accept the responsibilities involved in the safe handling and use of Black Mag’3®, return the container with Black Mag’3® to the place of purchase for a full refund of the purchase price. If you have any questions about the safe use of Black Mag’3®, contact Magkor Industries, Inc. Handle Black Mag’3® with care and keep Black Mag’3® out of the reach of children and people who are not aware of the hazards involved! Do not take Black Mag’3® internally. Failure to use Black Mag’3® in accordance with our instructions and data may result in severe personal injury or death to user and/or bystander.
For additional information or any technical information,
please contact us directly:
Downloads:
Safety First Data Sheet
In-Print Brochure
back to top
.
